What Is ENiCrMo3T1-4 Flux Cored Welding Wire?
ENiCrMo3T1-4 is a nickel-chromium-molybdenum alloy flux cored welding wire. The Minghua MH-ENiCrMo3T1-4 product is a gas-shielded flux cored wire manufactured for applications where a Ni-Cr-Mo weld deposit is required.
The deposited metal combines relatively high strength with resistance to localized corrosion, including pitting and crevice corrosion. This makes the classification relevant to selected alloy welding, surfacing and dissimilar-metal joining applications.
Buyers comparing different grades can also view Minghua's nickel alloy flux cored welding wire range for additional product options.
Key Features of ENiCrMo3T1-4 Nickel Alloy Flux Cored Wire
High-Strength Weld Deposit
Minghua product data lists a deposited-metal tensile strength of 780 MPa together with 42.5% elongation.
Resistance to Localized Corrosion
The Ni-Cr-Mo deposited metal is designed to provide resistance to localized corrosion mechanisms such as pitting and crevice corrosion under suitable service conditions.
Ni-Cr-Mo Alloy Welding
ENiCrMo3T1-4 is intended for welding applications requiring a nickel-chromium-molybdenum alloy weld deposit.
Joining, Surfacing & Dissimilar Welding
The wire can be considered for selected joining, surfacing and dissimilar-metal welding applications when ENiCrMo3T1-4 is compatible with the specified base materials and welding procedure.
Typical Applications of ENiCrMo3T1-4 Welding Wire
Application suitability should always be confirmed against the base material, welding procedure and service requirements. Based on the intended use of MH-ENiCrMo3T1-4, typical application categories include:
Ni-Cr-Mo Alloy Welding: Joining applications requiring a compatible Ni-Cr-Mo alloy weld deposit.
Surfacing Applications: Surfacing where a nickel-chromium-molybdenum alloy deposit is specified.
Selected High-Carbon Steel Related Applications: Applications involving surfacing or joining should be evaluated according to the actual base material and approved welding procedure.
Dissimilar-Metal Welding: Selected dissimilar-metal joints where ENiCrMo3T1-4 is appropriate for the materials and required weld-metal properties.
Application Note: Final filler-metal selection should be based on the base-material grades, welding procedure, service environment and applicable project specification. Contact Minghua if you need support confirming whether ENiCrMo3T1-4 is suitable for a specific welding application.
Mechanical Properties of ENiCrMo3T1-4
The following values are based on the current Minghua MH-ENiCrMo3T1-4 product data.
| Property | MH-ENiCrMo3T1-4 |
| Classification | ENiCrMo3T1-4 |
| Standard | AWS A5.34 |
| Product Type | Gas-shielded nickel alloy flux cored welding wire |
| Alloy System | Ni-Cr-Mo |
| Tensile Strength | 780 MPa |
| Elongation | 42.5% |
ENiCrMo3T1-4 Chemical Composition
The deposited-metal composition of MH-ENiCrMo3T1-4 is nickel-rich, with chromium and molybdenum as major alloying elements. The complete composition currently provided by Minghua is shown below.
| Product | C | Si | Mn | P | S | Ni | Cr | Mo | Cu | Fe | Nb+Ta | Ti |
| MH-ENiCrMo3T1-4 | 0.025 | 0.36 | 0.35 | 0.005 | 0.003 | 63.6 | 21.8 | 8.7 | 0.01 | 2 | 3.47 | 0.15 |
Technical Note: The values above represent the product data currently provided for MH-ENiCrMo3T1-4. Buyers should refer to the applicable product specification and approved welding procedure when confirming suitability for a specific service environment.
What to Confirm Before Ordering ENiCrMo3T1-4 Flux Cored Wire
B2B buyers should provide the main technical and purchasing requirements before requesting a quotation. This helps confirm product suitability and avoids selecting a filler-metal grade based only on the classification name.
01. Required Classification Confirm whether AWS A5.34 ENiCrMo3T1-4 is the classification required by your welding specification.
02. Base Material Provide the grades or specifications of the materials that will be welded or surfaced.
03. Welding Application Indicate whether the wire will be used for joining, surfacing or a selected dissimilar-metal welding application.
04. Required Wire Specification Confirm the required wire diameter and other operating specifications with Minghua before ordering.
05. Purchasing Quantity Provide the expected order quantity and destination so that Minghua can prepare appropriate B2B supply and quotation information.
FAQ About ENiCrMo3T1-4 Flux Cored Welding Wire
What is ENiCrMo3T1-4 welding wire?
ENiCrMo3T1-4 is a gas-shielded Ni-Cr-Mo nickel alloy flux cored welding wire classified under AWS A5.34. It is intended for applications requiring a compatible nickel-chromium-molybdenum weld deposit.
What is ENiCrMo3T1-4 used for?
MH-ENiCrMo3T1-4 is intended for Ni-Cr-Mo alloy welding, selected surfacing applications and selected dissimilar-metal welding where the filler metal is suitable for the base materials and welding procedure.
What are the mechanical properties of Minghua ENiCrMo3T1-4?
According to current Minghua product data, MH-ENiCrMo3T1-4 provides a deposited-metal tensile strength of 780 MPa and elongation of 42.5%.
What is the chemical composition of ENiCrMo3T1-4?
Minghua product data lists nickel at 63.6%, chromium at 21.8% and molybdenum at 8.7% as the major alloying elements in the deposited-metal composition. Refer to the chemical composition table above for the complete listed chemistry.
What information should I provide when requesting an ENiCrMo3T1-4 quotation?
Provide the required AWS classification, base-material grades, welding application, required wire specification, purchasing quantity and destination. This information helps Minghua confirm the product and prepare an appropriate quotation.
Related Nickel Alloy Flux Cored Wire Grades
Buyers comparing nickel alloy filler-metal classifications can also review ENiCrMo3 flux cored wire for another Ni-Cr-Mo welding consumable option.
Minghua also supplies ENiCrMo-4 flux cored welding wire for buyers comparing related nickel alloy welding consumables.
